The Round Table (Rational Pagans Forum)

Science & The Supernatural: A Discussion of the World Around us - Based on Science with an Interest in the Supernatural ...
It is currently 04 Aug 2020, 15:33

All times are UTC - 5 hours




Post new topic Reply to topic  [ 2 posts ] 
Author Message
PostPosted: 04 Jan 2011, 22:36 
Offline
Grand Poobah
User avatar

Joined: 18 Sep 2007, 11:26
Posts: 5793
Location: Buffalo, NY
http://www.instructables.com/id/Univers ... lding-kit/

seriously. Wow.

Quote:
introUniversal lamp shade polygon building kit
One simple cut-out shape lets you build all sorts of different designer-looking lampshades! You can make dozens different geometric forms using various numbers of the cut-out shape made from paper or plastic. All the standard mathematical polyhedrons and such are possible.

The pieces just fold together by hand into rigid forms, and you can take them apart and build into new shapes any time!

this is fun and educational for kids and adults alike, and you get a really nice lampshade when you are done.

As seen in ReadyMade Magazine, Dec. 2007/Jan 2008 issue

i






Remove these ads by Signing Up.

step 1What you need
I saw a lampshade made out of the shape below at a friend's house, so I traced the shape and made my own. the lamp i saw used thin plastic for the pieces. I believe the original design for this lamp was done over 30 years ago by the firm Iqlight, they sell pre-cut parts in case you do not want to make the parts yourself.

Below is the shape as an image, and i've also attached a DXF file.

You will need sheets of paper or plastic that allow light to get through. The stiffness of your material determines how large your pieces can be - stiffer material for larger pieces and larger lamps, thinner material for smaller pieces and smaller lamps. (see next step)

You will need a lamp fixture - just a raw socket on a cord. I found some nice ones at Ikea for $4, and some fluorescent bulbs. Use a compact fluorescent bulb so you can get more light without melting the plastic.

I experimented with a number of different plastics and sizes for the parts, here are my results:

- HDPE: works well, looks good, cheap and easy to get. I used 0.8mm thick stock for 8cm pieces (measured flat-side to flat-side). That's about the smallest you'd want to go with that thickness, you could go up to 12 or 15cm with that thickness. this is the least expensive plastic by far. One of the commenters suggested using plastic milk-bottles, which are made of HDPE, this is a good idea!

- Acetal (delrin): this seems to be the best choice for looks, it has the purest white color and best light dispersion (basically, looks just like acrylic except it doesn't crack as easily). I used 0.35mm stock for 6cm and 8cm pieces, and 0.5mm stock for 8-12cm pieces, and 0.65mm stock for 12-15cm pieces. It still is a little brittle and harder to work with than HDPE, and more expensive. if you cut this with scissors it will be somewhat tricky due to the brittleness, but possible.

- Vinyl: I did not try it, probably want to use thicker pieces since it is not very stiff. but you can use colors!

- Paper: I did not try paper but it should be good for smaller constructions.

- Laminated paper: this is a great idea suggested in the coments section. try laminating color tissue paper, then cut the pieces from that. very unique and colorful!

- Acrylic: too brittle, it will crack when you try to assemble. too bad!

- Nylon: has a yellow-ish look when lit up which makes it undesirable.

- for a large construction use stiffer material for the same size piece. ie, if you are making a lampshade with 12 pieces use thinner material than if you are making a shade with 100 pieces, assuming same size pieces.


Where to get it:

HDPE 1/32" sheet: sheet: http://www.usplastics.com item number 42584

Acetal sheet, 0.015" and 0.020":: http://www.mcmaster.com item number 8738K52 and 8738K53


i


Image

whoa.

Seriously think getting a membership there is worth it...

_________________
Chloride and Sodium: Two terribly dangerous substances that taste great together!


Top
 Profile  
 
PostPosted: 01 Feb 2011, 09:03 
Offline
Second-Sight Apprentice
User avatar

Joined: 21 Aug 2008, 13:41
Posts: 267
Location: West Virginia, USA
The shade is really pretty and they have lots of cool lamp ideas there. Great site.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group